1) Thermal relay: Ordinary small-capacity AC motor, good working conditions, no frequent starting and other harsh working conditions; due to poor accuracy, reliability cannot be guaranteed, it is not recommended.
2) Electronic type: Detect three-phase current value, set current value using potentiometer or pull-up switch, the circuit generally uses analog type, using inverse time or fixed time working characteristics. Protection functions include overload, phase loss, stall, etc., fault type is displayed by indicator light, and running power is displayed by digital tube.
3) Intelligent type: Detect three-phase current value, protector uses single-chip microcomputer to realize intelligent comprehensive protection of motor, integrating protection, measurement, communication and display. The set current is set digitally and operated by the buttons on the operation panel. Users can modify and set various parameters on site according to the specific situation of the motor; use digital tube as display window, or use large-screen LCD display, can support multiple communication protocols, such as ModBUS, ProfiBUS, etc., the price is relatively high, used in more important occasions; high-voltage motor protection uses intelligent protection devices.
4) Thermal protection type: embed thermal elements in the motor to protect according to the temperature of the motor winding, with good protection effect; but when the motor capacity is large, it needs to be used in conjunction with the current monitoring type to avoid the motor winding being damaged due to the hysteresis of the temperature measuring element when the temperature rises sharply when the motor is blocked.
5) Magnetic field temperature detection type: embed magnetic field detection coils and temperature measuring elements in the motor to protect according to the changes in the rotating magnetic field and temperature inside the motor. The main functions include overload, blocking, phase loss, overheating protection and wear monitoring. The protection function is perfect, but the disadvantage is that the magnetic field detection coil and temperature sensor need to be installed inside the motor.
3. Selection of protector type
1) For stand-alone independent motors with low working conditions, simple operation and control, and little impact on production due to shutdown, ordinary protectors can be selected. Because ordinary protectors have simple structures, convenient installation and wiring on site, easy replacement, simple operation, and high cost performance.
2) For motors with harsh working conditions and high reliability requirements, especially those involving automated production lines, mid-to-high-end and fully functional intelligent protectors should be selected.
3) For explosion-proof motors, eccentricity caused by bearing wear may cause high temperature at the explosion-proof gap, resulting in explosion hazard. Wear status monitoring function should be selected. For special equipment such as large-capacity high-pressure submersible pumps, due to the difficulty of inspection and maintenance, wear status monitoring function should also be selected, and the temperature of the bearing should be monitored at the same time to avoid major economic losses caused by sweeping accidents.
4) For protectors used in places with explosion-proof requirements, the corresponding explosion-proof protectors should be selected according to the specific requirements of the application site to avoid safety accidents.
Nov 19, 2024
Common Types of Motor Protectors
Send Inquiry
